Header Only - DO NOT REMOVE - Extreme Networks

S-Series / 7.x Default State changes

Userlevel 3
Article ID: 12516

S-Series, firmware 7.x
Matrix N-Series DFE, firmware 7.x

As a change from N-Series 6.x firmware, in 7.x firmware the following protocols have been disabled by default at the port level:
  • LACP - To enable on all ports: 'set port lacp port *.*.* enable'
  • GVRP - To enable on all ports: 'set gvrp enable *.*.*'
See also: 5203, 5237, 13381, and 13678.

0 replies

Be the first to reply!