Header Only - DO NOT REMOVE - Extreme Networks

S-Series f/w 7.71.01.0010 logs CBond Nvram error in Syslog


Userlevel 3
Article ID: 14586

Products
S-Series, firmware 7.62.01.0009 and higher

Changes
Booting the system onto v7.6x or higher firmware for the first time.

Symptoms
Seeing a "CBondNvram: Bad NVRAM csum" error in Syslog and Message Log ('show support'); for example:

code:

==============================================================================


code:

Message

code:

5/70

code:

Syslog Message

code:

07.71.01.0010

code:

04/04/2012 18:03:57


<
code:

3

>
code:

Bond[4.tusrAppInit]CBondNvram: Bad NVRAM csum 00; 00:01:00:00 - 00:00


code:

:00:00:00:00



Cause
This is due to the Virtual Chassis/Switch Bonding (VSB) area of NVRAM being found uninitialized, expected upon the first use of a VSB-aware firmware image. It may occur regardless of actual VSB configuration.

Solution
This message is harmless, requiring no user action, if seen under the stated conditions.

0 replies

Be the first to reply!

Reply