SecureStack C3, C2, B3, B2, A2
Enabled MAC Locking (i.e. '
set maclock enable
Created a static maclock entry for a MAC and Port (e.g. '
set maclock 00:12:34:AB:CD:EF ge.1.2 create
Created a static maclock entry for the same MAC but a different port in the stack.
Effectively, attempting to lock the same device on two different stack ports.
Received an error message from the CLI:
Set failed for
For example, here is the final command entry and the resulting error message in this scenario:
Set failed for ge.1.1
And, here is the corresponding SNMP Error that may be sent to the NMS:
Failed to set the static locked address [
]. MAC Locking may be disabled or unsupported for this port, the maximum number of allowed static MACs may have been exceeded, or the MAC Address may already be locked to this port or another port on the same device. ERROR: SNMP Error: Commit Failed (14). The attribute(s) contained in the failed SNMP packet were: etsysMACLockingStaticEntryRowStatus.18.104.22.168.216.176.223 (CreateAndGo)
Functions as Designed (FAD).
The same MAC address cannot be statically MAC Locked on more than a single port per stack.
The product Configuration Guides '
Known Restrictions and Limitations
Static MAC locking a user on multiple ports is not supported.