Header Only - DO NOT REMOVE - Extreme Networks

Assigning static IPs to Access points

  • 11 December 2014
  • 7 replies
  • 384 views

Userlevel 1
Hi,

Can we assign static IP to APs throught its CLI? What is the default username/password for AP? User guide/Maint guide instructs to assign static IP only after AP connects to controller. But we need to assign IP address and controller address manually to AP to make it adopt to controller. Running own DHCP server or specifying options in existing DHCP server are not possible.

Regards
Karthik.

7 replies

Userlevel 4
If it WM 3700/3600/3400 username and password for AP is same as controller.
From CLI of controller use
Connect
Type username and password.
Once you login you can assign static ip address and you can specify controller ip address to adopt as well.
Userlevel 7
If you are working with the IdentFi Wireless Access Points:

Default Log in: admin/new2day

cset ipaddr [i]
cset ipmask <255.255.255.255>
cset gateway [i]
cset authIpAddr 1 [i]
cset dhcp disable
capply
csave
(Wait until the prompt comes back)
reboot

Example:
cset ipaddr 10.1.1.1
cset ipmask 255.255.0.0
cset gateway 10.1.254.254
cset authipaddr 1 10.1.1.2
cset dhcp disable
capply
csave
(Wait until the prompt comes back)
reboot
Userlevel 1
Hi Doug,

Yes. Its IdentiFi portfolio. Thanks for the help.
Can anybody tell me the command for how to change/add tagging in AP.
Userlevel 7
I think that is the correct command....

# cset vlanVidWassp

Command syntax:
cset vlanVidWassp value(-1/1-4094/default)
#
What is the command to view the config?
Userlevel 6
What is the command to view the config?cget config globalOnly

Reply