wireless controller C100 Unmounting file systems:

  • 19 November 2013
  • 1 reply

Problem Description: I have a controller c100 in version 3.1 ,i have onli CLI session with serial cable .

The led status remains off

When C100 was started I try to do software update ,but it failed and I can 't use GUI for configuration .

I can use only serial connection 9600 N8 1


INIT: Sending processes the TERM signal

Stopping anacron: [ OK ]

Stopping keytable: [ OK ]

Shutting down console mouse services: [ OK ]

Stopping sshd:[ OK ]

Stopping xinetd: [ OK ]

Stopping crond: [ OK ]

Stopping portmapper: [ OK ]

Shutting down kernel logger: [ OK ]

Shutting down system logger: [ OK ]

Shutting down interface eth0: [ OK ]

Shutting down loopback interface: [ OK ]

Starting killall: [ OK ]

Sending all processes the TERM signal...

Sending all procmd: recovery thread got woken up ...

esses the KILL signal...

Syncing hardware clock to system time

Turning off swap:

Turning off quotas:

Unmounting file systems:

Please stand by while rebooting the system...

flushing ide devices: hda

Restarting system.

root (hd0,0)

Filesystem type is ext2fs, partition type 0x83

kernel /boot/vmlinuz ro root=LABEL=/ console=tty0

[Linux-bzImage, setup=0x1400, size=0x1101c6]

initrd /boot/initrd.img

[Linux-initrd @ 0x1ffbf000, 0x2028e bytes]

HiPath Wireless Controller version

Unauthorized access is prohibited.

HWC login: root


[root@HWC root]#

[root@HWC root]#

I have remote connection

Contact language: Italian, English only written

1 reply

Userlevel 7
Unfortunately this product is not something that was supported/offered by Enterasys or Extreme. If you are looking for a comparable replacement to this product, you should contact gsola@enterasys.com directly to discuss your options.


Doug Hyde
Sr Support Engineer
Extreme Networks