Header Only - DO NOT REMOVE - Extreme Networks
Question

q-in-q on EAS-200


Q in Q configuration

7 replies

Userlevel 6
Hi Arturo,

Can you please elaborate on your problem? Do you have VMAN already setup and it is not working? or are you looking for assistance with setting up VMAN?
Hi, Patrick

my switch is a EAS 200 24p, the VMAN command is not support it in this unit, but the q-in-q command is support it.

i put together a little lab to confirm if the q-in-q on this switches works but for some reason a can't get it to work.

here is an image of my configuration

.


as describe in the configuration had book this is how q-in-q works.

thanks for any help.
Userlevel 7
We need a network diagram with all the VLAN IDs that are used to check the configuration on the screenshot.
Ron wrote:

We need a network diagram with all the VLAN IDs that are used to check the configuration on the screenshot.



Hi, Ronald hope this diagram helps. thanks
Userlevel 7
Hi Arturo, it looks like this thread has been left behind. Do you still need help from the community with this or have you been able to get QinQ working on the EAS?
Userlevel 4
q-in-q on eas works the same as on D-Link. After enabling q-in-q state, outer tpid changes to 0x88a8. You should change outer tpid on tagged/trunk ports to 0x8100 in order to work.

Reply