we have a request to make WoL possible in our network.
I already found that aritcle: https://gtacknowledge.extremenetworks.com/articles/How_To/Wake-On-LAN-WOL-to-work-with-Netlogin
but I have a few issues:
- The first method doesn't work here. I can see, that "show udp-profile" forwards traffic to my dummy-vlan, but the device doesn't wake up. If I send out the WoL packet, when the computer is on, my wireshark can see the incoming WoL packet. I did all the commands, which are described for that method
- The second method is not applicable, because we don't want to edit scripts on the switch, when changing a netlogin-port - that is simply too much
- The third method is not applicable, because most of our switches doesn't support OnePolicy