How to replace Priority of Vlan?

  • 21 September 2016
  • 6 replies
  • 324 views

Userlevel 1
I have an untagged Port sending frames with Priority Value 0 to the receiver. I want that Priority value 7 is received. That is when the untagged Port sends the frames with Pri 0 the tagged port receives them and replaces the Pri with 7.

6 replies

Userlevel 6
What product are you using? Not all are capable of re-writing a tagged packet.
Userlevel 1
Extreme Network x670v
Userlevel 6
Hi Danial, please see the article below and let us know if that helps.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-mark-incoming-frames-with-802-1p-va...
Userlevel 5
This resource should help: https://gtacknowledge.extremenetworks.com/articles/How_To/Configuring-QOS-profiles-and-verify-QOS-is...

If you have any questions after reading through it, we can take it from there
Userlevel 1
@Henrique It worked.. Thank you so much you are a life saver :)
Thank you so much everybody for the help 🙂
Userlevel 6
@Henrique It worked.. Thank you so much you are a life saver :)
Thank you so much everybody for the help :)
That's great Danial! Thanks for the feedback!

Reply