I have the following problem:
I have a managed 4 Port-Noname-Switch attached at a switch G3G124-24 at port ge.1.4. The managed 4-Port-Switch is manageable and has its own IP-Address and should be reachable via VLAN ID 400 but tagged.
The G3G124-24 will authenticate the MAC address of the 4-Port-Switch. This authentication will set the egress status of the G3G124-24 switchport ge.1.4 to "vlan egress untagged" for vlan 400. That's normaly OK if it would be a workstation but not for my 4-Port-Switch. The 4-Port switch need to work tagged for vlan 400.
So I set static VLAN egress 400 on port ge.1.4 and everything is fine.
The static enty overwrite the egress state of the authentication process.
Now I had to change the G3G124 to a C5K125-48 and the result is:
The mac auth process will overwrite the static port egress value and my 4-port-Switch is not reachable anymore.
Is this normal?
In the past I thought, that egress static has the highest priority but at the C5 it doesn't looks like so.
Any ideas/sugestions are welcome.