Solved

How to add VX9000 to XMC wireless controllers tab

  • 10 May 2019
  • 2 replies
  • 377 views

Hello,

I set up XMC with all its components (netsight, analytics, fabricmgmr and NAC) running 8.2.5.50.
I also set up a cluster of VX9000 running 5.9.4.1-004R with one AP8533 (same version).

I would like to link the VX cluster and the AP to XMC but I could not find how.

The device discovery is OK, I can see both wireless controllers in the device tab (thanks to the ZTP+ configuration), but nothing appears in Wireless -> Controllers.

I enabled "Collect device statistics" on both controllers.

What configuration am I missing ?

Thanks
icon

Best answer by Zdenek Pala 10 May 2019, 09:06

Hi.

you need Extreme Cloud Appliance to “translate” the WiNG stats to XMC.

Most probably you will need also newer WiNG firmware.

today you can monitor your WiNG solution through snmp and FlexViews.
View original

2 replies

Userlevel 7
Hi.

you need Extreme Cloud Appliance to “translate” the WiNG stats to XMC.

Most probably you will need also newer WiNG firmware.

today you can monitor your WiNG solution through snmp and FlexViews.
Ok thanks Zdenek !

Reply