I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands

  • 12 February 2015
  • 6 replies
  • 398 views

I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands, but it's not want I'm looking for, thank you.

6 replies

Userlevel 7
Is there a command to use to clear statistics (counters)? When I use the show port statistics no-refresh, it show tx/rx etc. Some of the ports that shows the tx/rx packet count, do not have a amber/green link on the switch port LED. So it would seem that nothing is plugged in/turned on those ports.I ;think the stats were from before, the floor is mostly un-occupied now.

Hi John, Just press
code:
0
and the counters will reset.
You can clear all counters in the switch with the command:
code:
clear counters
.
Userlevel 7
What switch platform/model do you have ?

What are you looking exactly... port down status or ports with only the default VLAN on it or ports with no decription....
Userlevel 4
The Link state row shows you the state (see guideline at the bottom for a breakdown

* X460-24.1 # show ports statistics no-refresh
Port Link Tx Pkt Tx Byte Rx Pkt Rx Byte Rx Pkt Rx Pkt
State Count Count Count Count Bcast Mcast
================================================================================
1 A 63612649 85016650428 40431217 7274045343 1898181 636555
2 R 20 2306 4 714 0 4
3 R 3547 1034377 1436 379105 944 0
4 R 3541 1029624 1443 384535 951 0
5 R 0 0 0 0 0 0
6 R 0 0 0 0 0 0
7 R 4379 1152933 2497 519504 1138 0
8 R 0 0 0 0 0 0
9 A 1416271 120773687 13767 1503374 9255 4512
10 A 1415728 120514789 15268 1895612 10264 4512
11 A 1413066 119555991 13773 1687525 9259 4514
12 A 2353831 199350424 30050 2920062 20171 9879
13 A 1484261 125256509 14408 1574619 9673 4735
14 A 1492258 126027813 14570 1582396 9793 4777
15 A 1510889 127353849 14785 1600554 9937 4848
16 A 1519407 128170224 14999 1635819 10058 4941
17 A 37851097 7245648567 61468104 82055174671 105 16702
18 R 1655459 336585552 2448148 3370640784 2 973
19 R 0 0 0 0 0 0
20 R 0 0 0 0 0 0
================================================================================
> indicates Port Display Name truncated past 8 characters
Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback
* X460-24.2 #

Jason
Thank you !
Is there a command to use to clear statistics (counters)? When I use the show port statistics no-refresh, it show tx/rx etc. Some of the ports that shows the tx/rx packet count, do not have a amber/green link on the switch port LED. So it would seem that nothing is plugged in/turned on those ports.I ;think the stats were from before, the floor is mostly un-occupied now.

Reply