Header Only - DO NOT REMOVE - Extreme Networks

Netsight NMS: Device state is down while it's up!


Some switches in my network are being displayed as down on the map while they're up ...

I can remotely access them!

4 replies

Userlevel 7
Sorry but I don't see any switch that is down in your example.

The orange arrow icon means that the device is up but there is an active alarm i.e. port down

Cheers,
Ron
Userlevel 7
Ron wrote:

Sorry but I don't see any switch that is down in your example.

The orange arrow icon means that the device is up but there is an active alarm i.e. port down

Cheers,
Ron

a red arrow pointing down = device down/unreachable
Ron wrote:

Sorry but I don't see any switch that is down in your example.

The orange arrow icon means that the device is up but there is an active alarm i.e. port down

Cheers,
Ron

Thats righ so sorry I didn't notice .. but in this two switches when I open the device view I couldn't see the port states! when I oppened a neighbor switch and check the port connected to the first error giving switch I only see the mac!

and I have no alarms... I reconfigured snmp to solve the issue!
Userlevel 1
Ron wrote:

Sorry but I don't see any switch that is down in your example.

The orange arrow icon means that the device is up but there is an active alarm i.e. port down

Cheers,
Ron

I can help you with tunning software, write me to email jairojash@hotmail.com

Reply