Topology MAP to show AP's


Userlevel 5
How can we display AP's in the netsight topology AP?
When I discover the Topology MAP it only displays the controller and switches, not the AP's and where they are connected in the network.
If we set the AP's to be discovered via LLDP (On the controller) we also do not see them on the Topology MAP.

Regards

3 replies

Userlevel 7
I think that is correct as they don't count as an "device" - in Netsight Console you also have only the switches and the controller listed correct ?

As the AP has no SNMP agent running you can't discover them as a SNMP device.

If you use NAC in your network you'd use OneView to see were everything is connected to.
In the example below I search for the AP name and I'd see the switch port, the home controller, NAC that was used to authenticate the AP.

Don‘t know if in focus:

I think very helpful is the display format at „One View“ / „Maps“. There you could arrange the discovered Access Points in the plots of your buildings. With right klick at the AP you can get more information’s. Also the information’s described by Ronald.

Andre, let us know if you have any follow up questions on this topic or if there is anything you want to add.

Reply