Extreme Networks

Jorge · 08-07-2017

I configured an access point AP-7522E as a Virtual Controller with three vlan to use in three separate networks: one for corporate use that should connect to our existing LAN, another for employees and another for guests. Everything works very well w...

Jorge · 08-07-2017

Yes Robert, I can connect to either one via SHH and ping each one without a problem. Also, here's the output of "show mint neighbors", doing it from the VC: ap7522-362BF8>show mint neighbors 1 mint neighbors of 1B.36.2B.F8: 1B.36.2C.58 (ap7522-362...

Jorge · 08-07-2017

Hello Robert, Yes, they both have the same firmware version: 5.8.5.0-016R. We have them since two weeks ago, so they have the original firmware that came from the factory. Thanks! Jorge

Jorge · 08-07-2017

Hello Christoph, Yes, we did that manually in the 2nd AP, we entered the IP address of the VC but it was not working well. And yes, we activated natting for the 3 VLANs created in the wireless VC in order to be able to get internet access.

Jorge · 08-07-2017

Thanks Andrew for your quick answer. I'm not much of an expert in networking, but we have only one VLAN in our switch for our wired infra and we wanted to create the other VLANs in the wireless virtual controller to associate the wireless networks to...

Extreme Networks

User Statistics

User Activity

AP-7522E does not take VC configuration and wireless networks doesn't work

RE: AP-7522E does not take VC configuration and wireless networks doesn't work

RE: AP-7522E does not take VC configuration and wireless networks doesn't work

RE: AP-7522E does not take VC configuration and wireless networks doesn't work

RE: AP-7522E does not take VC configuration and wireless networks doesn't work