ddpatil89
New Contributor III
since ‎09-07-2021
‎08-30-2022

User Statistics

  • 51 Posts
  • 1 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

Does cisco XFP (10G LR & LX4) compatible to work with extreme 10G SFP+ extreme part codes -- 1030110 Gigabit Ethernet SFP+ module, 850nm, MMF 26-300m link, LC connector1030210 Gigabit Ethernet SFP+ module, 1310nm, SMF 10km link, LC connector  
X440-g2 user read-only account “show configuration” command not working. IOS version running : 21.1.5.2 patch1-2Please let me know is there any guide which lists all the commands which we can run under read-only account?
Copper port not getting up between 2 extreme 220 series switches. The copper cable length is around 90 meters. But when we connect both these switches back to back (means at same location) then the port gets up. We tested copper cable via LAN tester ...
We have 2 ×460-g2 connected in stack. One of the switch went faulty now.  We received new switch against RMA and we are going to add it back to the stack.Now the issue is by mistake we disabled stacking on working x460-g2 switch. So is the config for...
We have a requirement in our office for guest setup. Whenever a guest comes & need internet access, he should connect to guest SSID. The captive portal should ask for guest name, name of the person he is visiting & email of the employee whom he going...
Kudos from
GTM-P2G8KFN