Hello together,
I have a vrrp instance and the vr-default router.
Know I will create a separate virtual router. How must I configure the vrrp?
Can I use the same vrid? What is best practice?
Cheers,
Alexander
Hi,
i have a question about policy based Routing!
I wirte the Poliy like this:
entry REDIRECT80 {
if {
source-address 192.168.81.0/24;
destination-address 192.168.100.0/24;
} then {
redirect 10.10.50.1;
}
}
entry REDIRECT220 {
if {
...
Hellotogether,ich have a Problem with my Netsigt.The Device in NetSight appears down but comes up on next status poll.I have seen a solution from GTAC:https://extremeportal.force.com/ExtrArticleDetail?an=000074989And here is the Problem. In my Netsig...
Hallo,
i have a Problem with this SNMP Messages.
in Netsight: Login Failed Incorrect Community Name 10.10.10.11
in the Switch log: Slot-1: Login failed through SNMPv3 - not in life time
I have read in the community that i must add this command...
Thanks Stephen for your response.
Yes I need a separate VR, because VoIP traffic must be separated from the other network (Itβs a company rule).
I try your solution with the 2 virtual routers and vrid 1.
Thanks,
Alexander
Hi BAstian,
we have in Netsight 112 EXOS devices.
The devices where have the Problem, are all in another location (47) where is connected by vpn.
No the problem is all the time.
But I think when I can change the timeout to a higher value ...
