I have an existing stack with 2 nodes already. I am adding 3 additional switches to the stack. Can I preconfigure the 3 new switches as slots 3-5 before hand or will they need to be done once they are added to the stack as this article points out:htt...
Can a port share then be added to an MLAG? Client wants to have Layer 2 or Layer 3 sharing capabilities and then do a MLAG using those ports or the sharing ports. Is there some way to do this? Currently they have a Stack and are sharing between ...
Extreme Management Center 8.0.2.42 Legacy Console Errors out starting. The User Connection Service is unavailable. Have already restarted the server. This is an appliance so it is running some form of Linux. Need to start this service, but I am n...
Can you reuse a VLAN name and ID? Yes, as long as they are not trunked together in some way. If you use VLAN DATA TAG 10 in location A. In location B you use VLAN DATA TAG 10 and the only connection between the 2 locations is a Layer 3 connection ...
So, verify that your Physical is up on ports 3 and 4. Verify the sharing is up on 3 and 4. If both are up then I would look to change the algorithm of the share to L2 or L3 and see if the MLAG comes up.
Look at this as a reference:
https://gtackno...
Management Center is kind of the main dashboard. It controls everything. It also has Policy built in. Control and Analytics are separate appliances that report back to Management Center. Control is NAC. Analytic is the old Purview and it pretty ...
Download the firmware from Extreme to your computer. Then in the Network - Firmware portion down at the bottom you will see an upload button. Click it and then select the firmware you just downloaded.
