Extreme Networks

Erwin · 01-08-2018

Hi all, We use a VX9000 with 1200+ AP7522. RADIUS requests go to a Aruba RADIUS server. The Proxy mode for RADIUS requests is: "through-centralized-controller" so the VX9000 sends the requests to the RADIUS server. In a attempt to use a captive por...

Erwin · 05-03-2018

Solved: For future reference: There was a delay of 1 minute in the config of the Clearpass captive portal. It was overlooked by us as well as the engineer of our seller.

Erwin · 01-08-2018

Hello Doug, Thank you for asking and sorry i did not respond earlier. Status: We updated our AP's to 5.8.6.8 and used the extra VX9000 which has a minimal amount of adopted AP's. We stil have the slow response. We used the toubleshoot / Debug Capt...

Erwin · 01-08-2018

Thanks Andrew, Two commands where new to me. I had the same idea. I build an extra VX9000 controller to check if there is a resource problem. (not expecting that, we have a VX9000 with enough oempf to run nsight but it is still off). Only need to ado...

Erwin · 01-08-2018

thanks Andrew for your response. Host is in IP. We see in packet capture a direct response from the RADIUS server so a reverse lookup is not likely. After entering the name/password packet capture reveales a delay in the VX9000 before it sends an ac...

Extreme Networks

User Statistics

User Activity

Slow passthrough RADIUS request VX9000

RE: Slow passthrough RADIUS request VX9000

RE: Slow passthrough RADIUS request VX9000

RE: Slow passthrough RADIUS request VX9000

RE: Slow passthrough RADIUS request VX9000