Extreme Networks

Edson_Moura · 09-22-2021

Hi folks, I'm doing a LAB with VxLAN using GNS3.I configured ospf extensions or, If I configure static to the remote VTEPs and even so it's not working well. The results are below:* DC1LEAF1.1 # show ospf lsdb opaque-global Opaque Glo...

Edson_Moura · 11-16-2020

It is possible to create a routine using Python script or otherwise on the switch, where the script detect the vendors mac address (Extreme Access Point as example) on the FDB checking every 30 minutes and then, if a MAC OUI = X is found, this script...

Edson_Moura · 07-24-2019

Hello guys, I've some doubts about Policy Manager + Wireless Controller 1. When I'm creating a rule manually on Wireless Controller there are two options of Direction: In Filter and Out Filter. How done this configuration using PM? 2. It was crea...

Edson_Moura · 12-15-2015

Hi guys, When use this command "configure stacking {node-address node-address | slot slot-number} license-level [core | advanced-edge | edge]"? I read the manual but I didn't find any explanation.and examples. Thanks in advance, Edson Moura

Edson_Moura · 03-04-2015

Hello guys, How to enable mac-authentication on Identify Wireless? How do I change the password to mac-auth? Is there a default password? Thanks again, Edson Moura

Edson_Moura · 12-15-2015

Hi Stephen, I said core switch because the 2x X450G2-48t-10G4 460-G2 are my core layer. I haven't core license.  Thanks, Edson Moura

Edson_Moura · 12-15-2015

Hi Patrick, Thanks for the answer. I understood what you said. Best regards, Edson Moura

Edson_Moura · 12-15-2015

Thanks for the reply. Is there any difference (new features / capacity / etc) using the command core or edge for example? I have 2x X450G2-48t-10G4 configured in stacking mode (Core Switch) and some X450-G2-48p-GE4 as Edge (Access Switch). Best r...

Edson_Moura · 03-04-2015

Hello Ronald, I'm using NPS. Is there some way to change the password on controller? Example: In the switches SecureStack it's possible to change the password to mac-auth by Policy Manager? I'm trying to authenticate a printer. Thanks, Edson

Edson_Moura · 03-04-2015

I don't need to change the shared secret that will be used to controller-->radius. The shared secret will be the same. As above (Jason comments), I need to change the password that will be used to authenticate a device by mac-auth using NPS+AD. tks...

Extreme Networks

User Statistics

User Activity

VxLAN vs GN3

Does anyone have a script to get the port where access point based is connected based in your MAC OUI (MAC OUI previously defined) and then configure this port to pass one or more vlans em tagged mode?

Policy Manager vs Wireless Controller V2110

What does it mean "configure stacking xxxxx [core | advanced-edge | edge]" on XOS?

Mac-Authenticantion on Identify Wireless

RE: What does it mean "configure stacking xxxxx [core | advanced-edge | edge]" on XOS?

RE: What does it mean "configure stacking xxxxx [core | advanced-edge | edge]" on XOS?

RE: What does it mean "configure stacking xxxxx [core | advanced-edge | edge]" on XOS?

RE: Mac-Authenticantion on Identify Wireless

RE: Mac-Authenticantion on Identify Wireless