hias you use radius for authentication, have you checked the radius log if che clients maybe get denied?as alternative, you can debug the authentication process of the client using this commands:remote-debug wireless rf-domain <rfd-name> clients <cli...
hi basically this is just the configuration of the wlan (ssid).if you want to see the ssid on air, you need to map this wlan to a radiothis can be done via a profile or as device override (profile is recommended) nrrmu
hi there are two ways:1. rf domain config > there is a setting "controller-managed"with this the ctrl will become the rfdm for this rfd althouh it is in a different subnet/location/segment/rf-domain 2. bring it into the same vlan and rf-domain as the...
hi martinthis occurs because of the version mismatch.you can disable the version check with this command:enforce-version adoption none> use it in the profile that is used by the controller or as device overridei guess you need to re-adopt the aps (re...
hiyou can debug the authentication process, when you connect your client with this command: #remote-debug wireless rf-domain <your-rf-domain> clients <client mac address>max-events 10000 duration 600 events eap radius wpa-wpa2 this will show you the ...