Profile

Ronald Dvorak

Contact Details

My Content

1 to 20 of 50+ total
Posted By Ronald Dvorak Jan 20, 2021 7:46 PM
Found In Egroup: ExtremeCloud IQ
\ view thread
Not exactly... let’s assume we use a channel width of 40MHz and channel 36&40 as an example. You have no idea what the primary channel is with just that information. It could be 36+ (=channel 36 is the primary channel) or 40- (channel 40 is the the primary channel). The primary channel ...
Posted By Ronald Dvorak Jan 14, 2021 2:05 PM
Found In Library: ExtremeCloud IQ
Posted By Ronald Dvorak Jun 19, 2020 6:25 PM
Found In Egroup: ExtremeSwitching (EXOS)
\ view thread
Try that….. https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-upgrade-ERS-3500-switch -Ron
Posted By Ronald Dvorak Jun 17, 2020 7:05 AM
Found In Egroup: General Discussion
\ view thread
Looks like that the point count is stuck and doesn’t increase anymore… -Ron
Posted By Ronald Dvorak Jun 10, 2020 2:32 PM
Found In Egroup: General Discussion
\ view thread
Hi Ron, could you give some details on the score system - do I get 100 points if I like the post above :-) Also what about the points that some of us earned in the original Hub forum - any plans to merge that (I’d like to have my 50k+ back). -Ron
Posted By Ronald Dvorak Jun 10, 2020 2:01 PM
Found In Egroup: Data Center (MLX & CER/CES)
\ view thread
Thanks a lot !!! -Ron
Posted By Ronald Dvorak Jun 10, 2020 7:11 AM
Found In Egroup: Data Center (MLX & CER/CES)
\ view thread
Hi Joerg, FYI, you could give feedback on a KB article by clicking on NO at the bottom of the KB article question “Was this article helpful?” and write what is wrong or could be improved. I’ve linked your post and hope that the team will add the above settings that you’ve provide ...
Posted By Ronald Dvorak Apr 27, 2020 10:53 AM
Found In Egroup: Training (Extreme Dojo)
\ view thread
I’ve done a lot of exams but I’ve never had “all of the above” as the 2nd option -Ron
Posted By Ronald Dvorak Apr 2, 2019 12:58 PM
Found In Egroup: ExtremeCloud IQ- Site Engine & Extreme Management Center
\ view thread
Hi, I run a XMC unlimited in my lab and get a Analytics license violation error > exceed the end system limit of 100. I've 2 question regarding this issue. #1 I'm aware that there is a new license format that is end system instead of flows but it was my assumption that I'd need to ...
Posted By Ronald Dvorak Mar 22, 2019 11:22 AM
Found In Egroup: ExtremeWireless (Identifi)
\ view thread
And the screenshot please - that could sometimes tell you a lot. Here a very bad example, channel util on radio 1 on max which could result in a lot of errors.
Posted By Ronald Dvorak Mar 22, 2019 11:07 AM
Found In Egroup: ExtremeWireless (Identifi)
\ view thread
Hi Paul. could you please provide the controller model, AP model, software version. If you click on the AP in the AP overview you get the window with the client/noise,/channel util - could you please post a screenshot of it for this AP. -Ron
Posted By Ronald Dvorak Mar 11, 2019 6:52 PM
Found In Egroup: ExtremeCloud IQ- Site Engine & Extreme Management Center
\ view thread
Is that a typo in the link / instead of \ ?!
Posted By Ronald Dvorak Mar 11, 2019 3:17 PM
Found In Egroup: ExtremeCloud IQ- Site Engine & Extreme Management Center
\ view thread
Just in case my syslog config and the output of the show command of my X440G2 running 22.6.1.4. X440G2.7 # show config | i syslog configure syslog add 172.24.24.110:514 vr VR-Default local0 enable log target syslog 172.24.24.110:514 vr VR-Default local0 configure log target syslog 172.24.24.110:514 ...
Posted By Ronald Dvorak Mar 11, 2019 2:22 PM
Found In Egroup: ExtremeCloud IQ- Site Engine & Extreme Management Center
\ view thread
Here my 8.2 view which incl Syslog messages.... -Ron
Posted By Ronald Dvorak Mar 11, 2019 9:16 AM
Found In Egroup: ExtremeWireless (Identifi)
\ view thread
Anton, my ticket# is 01824597 and I've mentioned the open ticket from you. Shouldn't require any data as you could reproduce it with only one controller & AP (ROW-Austria) and PSK length of >48 -Ron
Posted By Ronald Dvorak Mar 10, 2019 10:19 PM
Found In Egroup: ExtremeWireless (Identifi)
\ view thread
Hi, looks like the software has some issues with a PSK that is > 48 characters. In that case if the WLAN service is enabled on the AP radio (1 or 2 or both) the radio will stay in scanning and don't provide service. Test setup: -AP3915i-ROW, AP3825e -Country Austria -PSK ...
Case#01824431 I've also added the request on how to add fantasy countries/flags. e.g. 10.10.10.0/8 with a ExtremeNetworks flag and the name HQ1 -Ron
Chris, you'd try it with a GTAC ticket because I think only the dev will know where the IP2country information is stored and if you are able to edit it. -Ron
Hi Chris, so you want to change the default because the customer/engineer failed to understand what a IPv4 private address space is.? Please post a screenshot to get an idea of which view you are talking about. -Ron
For me it looks like that you've created an alarm for 1.3.6.1.4.1.318.6.10 but the trap that is received is 1.3.6.1.4.1.318.2.3.3.0 - in that case the alarm is not triggered. I think the easy way to do it would be a trigger on the text "UPS: Passed internal self-test." -Ron