Hi All,
Would like to set RSS Threshold an AP3825s on C5210 Controller running v. 10.41.07.0014. Hoping to improve "Sticky Client" issue.
Thanks,
-Rich P.
Hi. I'm trying to find a solution for a unique situation. Currently, we have 2 SSIDs configured. One is for our 802.1x users and the other is a Guest. Our guest wireless users currently connect to the open Guest SSID and are taken to the Captive ...
Is it possible to add/configure APs prior to them being physically installed. I have a new building going up and we will be installing 40+ APs. I'd like to be able to provision and configure the APs in advance. Is that possible on the C5210 contro...
Hi,
I'm running 1200+ APs spanning 20+ buildings on an HA pair of C5210s running code 10.31.03.0012. I'm curios what I should be entering in the "Location" field in the AP Properties tab. I understand the purpose of "Zone" and for that we define ...
Hi Alok,
I'm not sure if this is the same problem, but we ran in to an issue where a student bridged their wireless interface with another interface (not sure why) and it was triggering spanguard on the AP port. The AP would disconnect, the laptop ...
Hi Dantecl,
If you stack the C3's, I believe you should be able to copy the code from one to the other using the follwoing command.
set switch copy-fw destination-system
and then reset
Good luck,
-Rich P.
