Saiprasad_Rao_R
New Contributor II
since ‎09-07-2021
‎08-30-2022

User Statistics

  • 67 Posts
  • 0 Solutions
  • 1 Kudos given
  • 1 Kudos received

User Activity

Currently we are using 36, 40, 44, 48 only under 5ghz radio with 40Mhz . Can I add 49, 153, 157, 161 also . . Deployment is huge around 850+ access points..... can i use 49, 153, 157, 161 in india.... we are planning to change 40mhz to 20Mhz/auto on...
End user says "Internet access is slow" , after connecting to Extreme 3805 AP and when connected to other extreme (altitude 4610) the internet access speed is better...... is "Flexi Client Access" a solution if end user has has slow network access.....
System has recovered from a possible loss of state synchronization with low-level session tables. Session tables have been re-synchronized and state re-established. If problem persists please contact technical support. What does this mean!
I See every time few ap's tunnel goes down frequently, is the MTU size the culprit , if yes what is the recommended value of MTU for Identifi 3805i Access Point. is there any global setting where all AP's MTU can be changed at a time.
User looses session with AP. Yellow exclamatory Mark Appears on Network Status. When I dis-associate the user from the AP, the user session again resumes normal......when this issue occurs user's ip address is not pingable from anywhere, user cant pi...
Kudos from
Kudos given to
GTM-P2G8KFN