David_Nelson
New Contributor II
since ‎09-07-2021
3 weeks ago

User Statistics

  • 19 Posts
  • 0 Solutions
  • 0 Kudos given
  • 2 Kudos received

User Activity

Hello,I have EIQ deployments with a mix of AP510c's and AP305c's in a K12 environments. Most locations have cafeterias, auditoriums and gymnasium that would benefit from enabling client load balancing on the AP's in those spaces.The documentation to ...
Hi All,I have a few X450 G2 switches already in production as IDF switches with sharing groups configured for the up-links back to the core MLAG pair. Now I need to get these IDF switches on-boarded for management in XIQ. It does not appear there is ...
Hi All,I am setting up a pair of EXOS switches as MLAG peers to provide redundant connectivity to stacked switches in our IDF closets. I have been referencing the EXOS User Guide along with some other GTAC articles. In one titled, “Key Design Points ...
I have have an X590-24x-1q-2c that was previously in a stack but is now in production as a stand-alone switch. I would like to use the QSFP28 ports on the switch but they appear to be reserved for stacking. I believe the solution is to run disable st...
I am upgrading wireless for a site where one SSID is configured to allow AD joined computers to connect automatically using certificate based 802.1x authentication. This has been working great and they are happy with the setup, so I am not dead set o...
Kudos from
GTM-P2G8KFN