Hi Team,I want to configure: "enable netlogin authentication service-unavailable " to avoid lost of service in case RADIUS servers are out of service.In ERS (and VSP I think too) you can configure:- ping reachability- RADIUS request dummyBut I cant f...
Hi Team,During an upgrade I read in the log file created after upgrade that a previous backup is created in this path:"2024-02-27 13:57:30.382 INFO [Thread-6] MigrateAndRestoreFiles.java:493 - backupdir = /usr/local/Extreme_Networks/NetSight/.install...
Hi Team,Over this topology:SLPP in COREs and SLPP-GUARd in edge ports on ERS-STACK1, but what about MLT ports (x,y)? Could I apply SLPP-GUARD over MLT? Is there any other option to detect loops in the MLT between stacks?Thanks in advance.EF1
Hi Team!!I have an analytics engine and XIQ-SE doesn't show any graph and/or flow data.I verified with tcp dump that no traffic is reaching it from VSPs.The VSPs configuration:- separated VRF from GRT (user defined) to split Telemetry and sFlow from ...
Hi Team,This is about NLB topology and where (which VSPs) activate NLB on VLAN.I have cluster of NLB uniscast servers connected to a vIST that acts only as L2, and the L3 of the VLAN is on other vIST of the SPB net.As the MAC of the clsuter is includ...
If you want create MLT with LACP over vIST peers:1. configure "lacp smlt-sys-id", must be the same in both peers2. enable LACP at global3.- configure MLT (smlt):mlt <mlt id>mlt <mlt id> encapsulation dot1qinterface mlt <mlt id>lacp key <key id>lacp ...
Maybe using supplemental CLI in those specific APs? I think this way you can override the Network Policy settings and this way you can add an schedule to the SSID directly on AP.
Hi,Besides Ludovico says, maybe you need additional VLAN between your CORE and FW to route the CLIP network because I belive you are behind the FW.You can configure this VLAN without mgmt rol, and then:- FROM CORE ,default route to FW´s IP- FROM FW, ...