Regarding the edge switches I was hoping that you had something that supported Fabric Attach such as EXOS or ERS. That would make it much easier for you. Unfortunately EOS does not have FA. There was a time where you had to disable the LACP LAG t...
Hi Martin, when the LAG is configured as LACP and it is operationally UP in order to add a VLAN try using the following syntax: vlan mlt <vlan id> <mlt id> I don’t think that you can add multiple VLANs in one step. Just curious what type of ...
The commands that you listed are from the EXOS platform. Different procedure for them. On ERS platform assuming you have the same code it should be straight forward. Reboot usually not required. I highly recommend first powering up the new switch by ...
You are almost there. The following is an example of how to redistribute direct and static routes in the vrf VOICE:router vrf voiceisis redistribute staticisis redistribute static enableisis redistribute directisis redistribute direct enableexitisis ...
Did you enable IPVPN on the vrf?router vrf voiceipvpnI-sid <choose an I-sid value for the L3 VSN>ipvpn enableexit You will need a premier license for this feature.
