Extreme Networks

Christoph_Bloos · 06-07-2016

I have to attach 3805 APs to a V2110 Controller running version 09.21.07.0007 (need v9 as I have still to support 2600 APs). The config manager module is trying to downgrade the APs image from 10.01.04.1003 to 09.21.07.0007 which is failing. Here ...

Christoph_Bloos · 06-24-2016

Hi all, there is a solution now from GTAC Support. They have now a new release (09.21.10.0005) available to download. Use this release to upgrade your controller and the 3805i APs are downgrading correct to the Version 09 Release. (The Software ...

Christoph_Bloos · 06-07-2016

local sub net - layer 2

Christoph_Bloos · 06-07-2016

Hi Gareth, I have it like in your screenshot. On thing I have seen in the log: Wireless AP automatic software upgrade/downgrade has failed. May be a corrupted image was selected as a default. Please select another default image. This alarm will ...

Christoph_Bloos · 06-07-2016

Hi Gareth, The AP turns into green, when I register it (under AP>Bulk Configuration). But it is still rebooting after about 3 minutes. On the Menue AP > All I can assigne WLANs, also I can see the IP configuration (using DHCP). But both Radio Modu...

Christoph_Bloos · 06-07-2016

Hi Gareth, this seams also to fail. once I do the controlled upgrade mode it looks like it starts the upgrade, but the AP is again going into a boot loop. Between the Controller and the APs there is no Firewall, as it is on the same L2 VLAN. MTU si...

Extreme Networks

User Statistics

User Activity

How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007

RE: How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007

RE: How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007

RE: How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007

RE: How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007

RE: How to downgrade an AP 3805 image from 10.01.04.1003 to 09.21.07.0007