Extreme Networks

Malik · 04-17-2023

Does ERS3600 Switches support the OSPF configuration?

Malik · 03-06-2023

hi I currently possess an NX-5500 controller and have previously successfully adopted 310i APs to this controller. However, I have encountered an issue when attempting to adopt a new 310 AP to the same controller, as it is not being recognized.To ado...

Malik · 03-01-2023

How can I change the name of ERS3600 Switch by CLI command?

Malik · 02-02-2023

Greetings,I have a new 305C APs so can make this APs adopted to NX5500 Controller? thanks in advance

Malik · 05-29-2022

Does the ERS3600 support SNMPv3 ?

Malik · 03-07-2023

Hello Christoph_SThe newly installed access point is running version 7.7.1.0-005R. However, the older access point is currently operating on version 7.5.1.0-015R, has already been adopted by the controller, and is functioning properly. Additionally, ...

Malik · 05-31-2022

Thank you Ludovico for your answer. Can you provide me with the SNMP V3 configuration command?

Malik · 11-15-2021

thanks rmu kindly find the above network diagram,so all devices are connecting together by core switch and all devices in vlans have an ips from an External DHCP server so ths APs connected to the ERS Access switch on port (eth 1 - 9 ) Which belong t...

Malik · 11-14-2021

thanks rmukindly find the attached configuration file for NX-5500 controller.

Malik · 11-11-2021

Hi thanks for all replay I did it but in a different way, so I have configured bridging mode in WLAN to Tunnle mode with vlan 1725 assignment, after that clients get IP from this vlan (1725) and everything's it's ok,but the new issue appeared, which ...

Extreme Networks

User Statistics

User Activity

OSPF configuration

310i adopted issue

ERS 3600 Switch Name Change

AP305C adoption

ERS3600 SNMPv3 Configuration

Re: 310i adopted issue

Re: ERS3600 SNMPv3 Configuration

Re: different Vlan configuration

Re: different Vlan configuration

Re: different Vlan configuration