Extreme Networks

Doug_Jaquays · 08-04-2015

I'm wondering if anyone has any experience using OEM 10Gbps SFP+ optics? I'm guessing that any link issues will be met with a, "You aren't using a supported optic" response by support. Other than that, has anyone actually had any issues with compat...

Doug_Jaquays · 05-07-2015

We have a situation where multiple "clients" share the same uplink. For the sake of isolation and ease of recognition, I'd considered moving to PVLans instead of using the same VLAN for all traffic. However, it seems that in order to use PVLans, th...

Doug_Jaquays · 08-04-2015

Thank you both for your quick responses! They both put a lot of my concern to rest.

Doug_Jaquays · 05-27-2015

I think it may be time for methodical documentation. This generally leads to finding the issue. Start at your core, go through every port and verify they have the vlans needed and are in the correct tagged/untagged binding, verify all LAG groups are...

Doug_Jaquays · 05-27-2015

Unless all your APs plug directly into your core, none of your APs are on vlan300 right now. (sh vlan on both edge switches only show v300 assigned to 2 ports with only 1 active)

Doug_Jaquays · 05-26-2015

Well, my initial thought was maybe there's an issue with routing traffic back to the wireless clients. Now I'm just going to ramble ideas and we'll see what happens. Are there any LAG groups in the path wireless clients are taking? Perhaps there's ...

Doug_Jaquays · 05-25-2015

Can you post the results of show vlan and show iproute from the core and the edge switches? You can sanitize the IPs as long as it's easy to tell the different subnets apart still and the logic stays accurate.

Extreme Networks

User Statistics

User Activity

OEM 10Gbps Optics - Safe or not?

PVLan Network uplinks

RE: OEM 10Gbps Optics - Safe or not?

RE: Communication between 2 Vlans

RE: Communication between 2 Vlans

RE: Communication between 2 Vlans

RE: Communication between 2 Vlans