Extreme Networks

Chris · 01-12-2016

Hi, is it possible to filter snmp message from EXOS? I want to do a snmpbulkwalk to a switch with more than 800 VLAN's. The snmpbulkwalk need more than 5 minutes. This is fatal for my rrd graphs. Can I dismiss all VLANs (IF-MIB::ifDescr.1000001 ... ...

Chris · 01-12-2016

Hi Drew, thanks for your answer. This would be helpful. 

Chris · 01-12-2016

I tried librenms but it's the same poller mechanism as observium uses it.

Chris · 01-12-2016

@Frank - observium is very helpful but it is only usable if the snmp poller need less than 5 minutes  @ James - thank you very much for this notice. I will try this tool asap.

Chris · 01-12-2016

Thanks for your fast feedback. I want to use observium and still tried the -Cr option. But the snmp request dies after some seconds with following message: Error in packet.Reason: (tooBig) Response message would have been too large.

Extreme Networks

User Statistics

User Activity

EXOS SNMP filter

RE: EXOS SNMP filter

RE: EXOS SNMP filter

RE: EXOS SNMP filter

RE: EXOS SNMP filter