Extreme Networks

BrunoE · 12-11-2018

Hi everybody, I'm facing a tricky problem installing a CA signed certificate on our VSP 7200 switches. All is fine for CA's root and intermediate certificate: code:certificate install-file offline-root-ca-filename certificate install-file offline-c...

BrunoE · 10-25-2018

Hi, I've configured SNMP v3 correctly on an ERS4900 series switch, all is working fine. I'm able to send traps v3 too. But I would test to send Informs instead of Traps: so I've configured this with this command: snmp-server host v3 inform and n...

BrunoE · 08-27-2018

This question because we use an operator's L2 VPN tunnels to interconnect our VSP on different remote sites. Instead of using a different tunnel for each adjacencie, it would be easier that switches could see each other via same L2 tunnel, forming so...

BrunoE · 06-17-2020

Hi Sean, Sorry for this very late response. One year after, I’m still unable to send SNMP inform notification from our ERS4900 Series switches...so we were forced to use SNMP trap and declare SNMP engineID of each our switch into our snmptrapd.conf ...

BrunoE · 12-11-2018

Ok, I've just understood the problem: signed certificate doesn't exactly match certificate's subject attributes inserted before csr generation. Adjusting subjects parameters accordingly to signed certificate resolved the problem.

BrunoE · 12-05-2018

Hi, Did you finally manage your radius authentication on VSP7k ? Anyway, you have just to return a radius vendor-specific attribute for Nortel Networks provider with number 192. For value, you have to give a decimal number from 1 to 6 (for EDM acce...

BrunoE · 10-25-2018

Hi, I've already seen the doc about SNMP trap/inform notifications. I was wrong in my last message: the right command that I use is this one: snmp-server host A.B.C.D v3 auth-priv inform but as I mentionned, nothing is sent by the switch.

BrunoE · 08-27-2018

Hi Ludovico, Thanks for your fast and precise response. We'll work on a such design in the next weeks.

Extreme Networks

User Statistics

User Activity

Unable to install SSL certificate on VSP7200

Unable to send SNMP Inform notifications form ERS4900 series

Is it possible to get multiple is-is adjacencies on a same port with VOSS7 on VSP 7200 series switches ?

Re: Unable to send SNMP Inform notifications form ERS4900 series

Re: Unable to install SSL certificate on VSP7200

RE: Can't configure RADIUS NPS on switch VSP7254

Re: Unable to send SNMP Inform notifications form ERS4900 series

RE: Is it possible to get multiple is-is adjacencies on a same port with VOSS7 on VSP 7200 series switches ?