Hi Chris, I don't work with the EOS brand switches however generally I can tell you that for IGMP to work you need three things. They would be:Host - The end device that will be generating the multicast request. Most often these are in the form of a...
I believe this is the same question you asked in the ticket you opened with us that I helped with.
For the community it was due to Multipath not being enabled for BGP. BGP (I or E) will only ever use 1 path by default. By configuring Multipath for B...
Pawel,
Depending on the platform (i.e. Exos, VSP, NetIron, Network OS) there may be other options you can use to control flow of L3 traffic from one network to another on a particular system. However, as a general rule of thumb if we are just ta...
Pawel,
That part number goes to the following part.
Model: 10G-SR transceriver
Part# 10G-SFP-SR 57-0000075-01 , 10GE SR 300m SFP+
Based on the above information it will work with a VDX 6740. in terms of transciever part list please follow ...
Laura, your welcome we're glad we are helping.
First let's be clear the only time a virtual interface will "see" traffic is when any routing is done. Also, if you were trying to capture total bandwidth either inbound or outbound from an a virtual i...
