just use the "default" then it will select the method that has been selected by the CLI..In future there is no need to interrupt the boot-process at this stage as the switch will auto-select the one that is selected via the CLI (use image primary/sec...
Hello, Yes, it's possible to stack up to 8 compatible units with EXOS. This also applies to the x670-G2 platform.If you're using alternate stacking, and a ring-topology, then you're currently using probably the following:Slot1 port 1:47 to slot2 port...
I personally wouldn't use STP in such an enviornment, but set up the 5420s as MLAG peers and configure both uplinks on each of the x435 as an LACP link aggregation.This way you don't have STP block one of the ports to each switch and can make use of ...
Yes, by using the command "configure account <user> password encrypted <password>" you are telling the switch you have a password that has already been encrypted before. So the string that is being entered as the password is seen as an already encry...
I suggest following this article: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000082599 If you replace a node with the same type there's no need to "unconfigure slot" (as this would remove the configuration for that slot) that's mentio...
