Extreme Networks

oxoyoz · 05-01-2023

Hi All. Need some guidance here:After AP5010 is switched from XIQ to WING mode - can its MGMT CLI interface be accessed via zero config IP address by the eth0/eth1 port, or can it only be accessed via the microusb console port? Asking this because th...

oxoyoz · 04-28-2023

Hi I encountered an issue in the below setup and any help is appreciated!- I set the Eth1 port on my Aerohive AP in WAN mode (WAN IP assigned by ISP via DHCP). It can pull an IP address (say 1.2.3.4) from my ISP, and the AP can ping / trace route to ...

oxoyoz · 03-09-2023

Curious if this AP work with any brand of routers, or does it require Extreme Networks' AP controller to manage?My current plan is to connect 3 APs to a consumer brand router and use XIQ to to manage AP's basic functions -- will this setup work? Than...

oxoyoz · 02-04-2023

Will this AP work in standalone mode with the newly release 7.9.0.0 Wing firmware? Also it seems the flash UI is no longer included so configuration can only be done through CLI? Thanks.

oxoyoz · 05-18-2022

Does anyone know the CLI that shows AP's actively connected client devices' (through wifi radios and also ethernet) information, including hostname, mac address, IP address ...etc ?I know the WebUI only shows connected Wireless Clients, but not those...

oxoyoz · 05-07-2023

Thanks. Converted my AP to Wing mode for better CLI command lines. Chris. Do you know where I can find the CLI tutorial for the XIQ OS? Is it still Aerohive's?

oxoyoz · 03-13-2023

Matt. You can customize AP5010's 6G Radio Profile by excluding any WiFi2 Channel (6Ghz) from the pool. Examples given below. Once configured, deploy it to the selected device and "Update Devices" on the CloudIQ website. It may take a while for the d...

oxoyoz · 03-08-2023

So you said you can access GUI of AP505i that's running 7.9.0.0 firmware by allowing HTTP access (less secure) but banning HTTPS access to the access point? I have an AP510E and noticed the same problem (cant access GUI) so I downgraded to 7.7.1.5

oxoyoz · 03-04-2023

Does this ap only work with Extreme Networks brand controllers? Also if I use XIQ can i connect to a random router and get Ip address? Thanks

oxoyoz · 06-03-2022

I asked the same question last year and here is the reply:https://extremeportal.force.com/ExtrArticleDetail?an=000098901&q=AP510E%20power Set your 2.4G WiFi channel to 6, and your 5G channel to upper ones on or above 149 -- you should get the highes...

Extreme Networks

User Statistics

User Activity

AP5010 WING Mode MGMT CLI Access

Aerohive AP Eth1 Port WAN Mode But No Internet on WIFI on a VLAN

Does AP5010 (universal APs) work with any routers

AP5010 Standalone Mode

CLI to show AP's connected devices' information

Re: AP5010 WING Mode MGMT CLI Access

Re: Configuring Wi-Fi 6 / Radio 2 on AP5010

Re: AP505i GUI issues after firmware update

Re: AP5010 Standalone Mode

Re: AP510e Maximum Transmission Power at 18dbm