Extreme Networks

colink · 05-04-2023

We have a cluster pair (Active - Standby) of NX5500 controllers running on 5.9.1.5 firmwareThey're supporting a mixture of AP6532 and AP7632 APs, totalling 104. The AP6532 APs stop us from upgrading the firmware, until they are replaced.We monitor va...

colink · 02-22-2022

I went to use my previously working WiNG Manager (1.07) this morning and it's now throwing up a Flash Harman alert. I've been using 1.07 fine for months, but now have the Flash Player alert that we used to get with the previous older versions of WiN...

NX5500 with no AP310 default profile · 11-16-2021

Hi Team, I've recently upgraded a clients NX5500 from ver 5.8.6.0 to ver 7.6.2.0. , with no problems. They have multiple RF-Domains all with AP7532 wireless APS. We run an individual AP profile for each RF-Domain. They will soon be purchas...

colink · 08-01-2021

We have an existing RFS4000 with 24 x AP7532 APs, all running 5.8.6.0 firmware.The AP7532s are end of purchase, so we're going to procure some Extreme AP310 APs and add them later.Along with the new APs we're going to replace the RFS4000 with an NX55...

colink · 12-01-2022

You could use the WiNG Manager (1.08) to display the information you're after.Statistics - System - [RF Domain Name] - Wireless ClientsSort by the AP Hostname column and then click on the MAC Address for detailed client information.You can change the...

colink · 02-23-2022

Thanks Gary. Not ideal, but it might have to be the workaround for the time being.

RE: NX5500 with no AP310 default profile · 11-17-2021

That's great news. I just needed confirmation that I can clone an existing profile and substitute the new matching model number (AP310) Colin Kennedy Network Engineer | Networks

colink · 08-02-2021

Thanks Chris.I was just after some assurance that the APs would adopt and accept firmware from the controller.I’ll pre-load both firmware versions onto the NX5500 (including AP7532 and AP310 if not included in image) and set the AP profiles to auto-u...

Extreme Networks

User Statistics

User Activity

NX5500 Controller at 29% CPU - dropping snmp

WiNG Manager 1.07 Harman Flash Player error

NX5500 with no AP310 default profile

Firmware NX5500 upgrade from 5.8.6.0 to 7.6.x.x

Re: How to verify how many wireless clients are conected over nx5500 controller on all access points

RE: WiNG Manager 1.07 Harman Flash Player error

RE: NX5500 with no AP310 default profile

Re: Firmware NX5500 upgrade from 5.8.6.0 to 7.6.x.x