Extreme Networks

Jan_van_de_Bor · 10-15-2017

Extreme ap6532 (wing 5.8) Ge1 interface configured as dot1xsupplicant (client) for wired 802.1x authentication of AccessPoint connected to cisco 2960x switch (15.2(4)E5) configured with cisco ISE 2.3 as radiusserver. During authentication of AP a rad...

Jan_van_de_Bor · 10-16-2017

Problem solved. It seemed ISE was forcing EAP/TLS where AP was expecting EAP/MD5. Therefore responding "Bad certificate (42)" Also in radius log found: sslv3 alert bad certificate:s3_pkt.c:1493:SSL alert number 42 This error message tells: the serv...

Jan_van_de_Bor · 10-16-2017

Accesspoint AP6532 (AP6532 version 5.8.6.0-011R) profile ap6532 default-ap6532 ..... .... interface ge1 dot1x supplicant username zebra-ap password *xyz* tx Timo.

Jan_van_de_Bor · 10-15-2017

Tx Andrew. It is the accesspoint itself being a radiusclient in our setup . We are configuring 802.1x on the wired network. Also AP's themselves need to be authenticated. Therefore we have configured AP's Ge1 interface as dot1xsupplicant (username/p...

Extreme Networks

User Statistics

User Activity

PEAP failed SSL/TLS handshake because the client rejected the radius server certificate

RE: PEAP failed SSL/TLS handshake because the client rejected the radius server certificate

RE: PEAP failed SSL/TLS handshake because the client rejected the radius server certificate

RE: PEAP failed SSL/TLS handshake because the client rejected the radius server certificate