Sergey_Vekli
New Contributor II
since ‎09-07-2021
‎08-30-2022

User Statistics

  • 34 Posts
  • 0 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

Hi all. Config. We have two X670 with MLAG and MPLS/VPLS enabled, some ports use MLAG. We have shared group of 4 ports for ISC link between switches, also have customer vlan V100 on both switches, vlan V100 does not added to any MLAG ports, only to...
Switch X670. BDF flapping on all peers. We enable log debug-mode for bfd. (In this log problem start at 1:50). And we can't find trigger for this behaviour.
VPLS VPN not working. After disabling see errorMPLS gport resolve failed for unit = 0 vpn = 0x70e3, port = 0xffffffff vp = 0x18000a0c, rv = -7 (Entry not found)08/30/2016 11:37:25.99extreme_mpls_del_vp_nh_xref: MPLS ECMP NH vp : 0xa0c l3intf = 0x83f ...
X670 connected to other VPLS capable device who can't use manual settings for vc type. When created pseudowire with tagged type, connection stay down and in dump we see label mapping messages with VC type 0x0004 (Ethernet VLAN) from other device and ...
How can be changed VC Type from VC Type: Ethernet (0x0005) to VLAN (0x0004) for one VPLS connection? What feature is the same as Cisco "pseudowire-class"?
Kudos from
GTM-P2G8KFN