Hi:
I used to use Netsight on an Enterasys network. I am not on a Cisco network and I am trying to use Netsitght. Is this a practical thing to do? Currently I would like to do the following
Use FlexViews to tell me broadcasts per second per port...
Does anyone actually replace their switches every 5 years? If so can we have your old stuff? I work for a community college and we could use switches that are capable of POE af or at. They could be 100 Mb but 1 Gb would be better.
Since we are ...
I'm frustrated already just trying to get a quote. A trusted source has told me Prime is terrible. Not going there. I will look for some other tool if Netsight is not viable on an all Cisco network.
Laura:
Not all of the channels in the 5 Ghz band are useable all of the time. If you are near an airport then some of the 5 Ghz channels are not available to you. DFS stands for Dynamic Frequency Selection so basically you have that feature turned...
Laura:
I can probably help you out remotely either weekends or before or after normal work hours EST. Let me know if you want help.
John
john@netesp.net
Laura:
It depends on your experience. If you have inherited this controller and are just trying to get your head around it I think you should get yourself into one of Extreme's training sessions. You will need to do a 4-5 day session to get you he...
Are you sure you want to do this? To pull it off you have to enable Bonjour multicast. You have to enable multicast and then define the Bonjour protocol as one that you allow. You should think about this carefully and lock this down to only the de...
