Hello good morning.
I ask for your help to achieve something that is out of the norm, but in our case, it would solve some problems;
I have to make a demonstration of a pair of access points Identifi (3805i), and the approach is to make it virtualizing the V2110 controller.
1 pc with win 10, in which we have working a version of Vmware Worksation Pro
1 Switch 3510 with PoE, Avaya
2 ap 3085i
I have already created the virtual machine and it works (at least it seems that way) without any problem. We can enter the Extreme portal and visualize the options of the controller.
What I can't do is to register the access point, and I suspect it would have to do with the fact that the pc that is virtualizing, only has 1 ethernet port, and when virtualizing, the interfaces esa0 and esa1 are bridged to the ethernet output of this machine.
Is there any detail that might be becoming obvious?
It is not clear to me if the administration interface has to be different from the data plane interface (10.0.0.1).
Any that can give tips on how should be the network configuration between the virtual computer, the Avaya switch and the administration pc?
It sounds very newbie, and we are trying to understand if it is possible to make the registration of the ap´s with this equipment that we have at hand.
Any information you can provide, will be useful and allow us to learn more about the proper functioning of the controladroa and the AP´s
Thank you in advance