Header Only - DO NOT REMOVE - Extreme Networks

Software update results in two versions

I did an update to a summit x440 using tftp. xos version After successful update and reboot I get two different versions of software when I do show switch Does this matter? Many thanks James X440-24t.1 # show switch SysName: X440-24t SysLocation: SysContact: support@extremenetworks.com, +1 888 257 3000 System MAC: 00:04:96:9C:66:F8 System Type: X440-24t SysHealth check: Enabled (Normal) Recovery Mode: All System Watchdog: Enabled Current Time: Thu Feb 16 15:58:17 2017 Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC. Boot Time: Thu Feb 16 15:43:32 2017 Boot Count: 2 Next Reboot: None scheduled System UpTime: 14 minutes 45 seconds Current State: OPERATIONAL Image Selected: primary Image Booted: primary Primary ver: Secondary ver: Config Selected: primary.cfg Config Booted: primary.cfg primary.cfg Created by ExtremeXOS version 150465 bytes saved on Thu Feb 16 15:42:50 2017

1 reply

Userlevel 7
Hi James,

This is normal. The switch has two partitions that software can be installed to (called 'primary' and 'secondary'). This output indicates that the EXOS version loaded on 'primary' is, and the that the EXOS version loaded on 'secondary' is It also indicates that the 'primary' partition is selected to be used and is currently booted.