topic Re: 650 Aggregate mode - how can chose both ports in LACP aggregate mode? in Aerohive Migrated Content https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61515#M1036 <P>That's how we do it. Are the 650s capable of LACP or only Kalpana Etherchannel as older Aerohive AP models? </P> Thu, 25 Apr 2019 10:48:05 GMT bruce_stahlin 2019-04-25T10:48:05Z 650 Aggregate mode - how can chose both ports in LACP aggregate mode? https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61513#M1034 650 Aggregate mode - how can chose both ports in LACP aggregate mode? Wed, 24 Apr 2019 19:44:10 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61513#M1034 agroch 2019-04-24T19:44:10Z Re: 650 Aggregate mode - how can chose both ports in LACP aggregate mode? https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61514#M1035 <P>I see I have to choose device template but I have only few access points that needs that so should I create two templates? One for aggregation an other for non aggregation mode? </P> Wed, 24 Apr 2019 20:04:17 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61514#M1035 agroch 2019-04-24T20:04:17Z Re: 650 Aggregate mode - how can chose both ports in LACP aggregate mode? https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61515#M1036 <P>That's how we do it. Are the 650s capable of LACP or only Kalpana Etherchannel as older Aerohive AP models? </P> Thu, 25 Apr 2019 10:48:05 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61515#M1036 bruce_stahlin 2019-04-25T10:48:05Z Re: 650 Aggregate mode - how can chose both ports in LACP aggregate mode? https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61516#M1037 <P>My Juniper is set to LACP so it looks like it support LACP from GUI - after modified 650 template</P> Thu, 25 Apr 2019 19:24:08 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/650-aggregate-mode-how-can-chose-both-ports-in-lacp-aggregate/m-p/61516#M1037 agroch 2019-04-25T19:24:08Z