https://community.extremenetworks.com/t5/aerohive-migrated-content/need-confirmation-of-firmware-load/m-p/86546#M11130 <P>I recently updated one of our SR2148P switches from 6.5r5 Honolulu 136354 to 6.6r2-SR2000-6.6r2a.img.S. HiveManager reported that the firmware uploaded successfully. After that, the switch would not boot up. The next day I power cycled the switch and had the same result. I later connected a console cable to view the boot up messages and it booted up fine at that time.</P><P>I just need to know if the 6.6.r2 load is stable since we are beginning to apply that to a number of our critical switches. Thanks</P> Fri, 08 Jun 2018 04:54:42 GMT gpower 2018-06-08T04:54:42Z https://community.extremenetworks.com/t5/aerohive-migrated-content/need-confirmation-of-firmware-load/m-p/86546#M11130 <P>I recently updated one of our SR2148P switches from 6.5r5 Honolulu 136354 to 6.6r2-SR2000-6.6r2a.img.S. HiveManager reported that the firmware uploaded successfully. After that, the switch would not boot up. The next day I power cycled the switch and had the same result. I later connected a console cable to view the boot up messages and it booted up fine at that time.</P><P>I just need to know if the 6.6.r2 load is stable since we are beginning to apply that to a number of our critical switches. Thanks</P> Fri, 08 Jun 2018 04:54:42 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/need-confirmation-of-firmware-load/m-p/86546#M11130 gpower 2018-06-08T04:54:42Z https://community.extremenetworks.com/t5/aerohive-migrated-content/need-confirmation-of-firmware-load/m-p/86547#M11131 <P>According to their firmware matrix, 6.5r9a is the most stable release for that device, might want to try that one?</P><P>&nbsp;</P><P>Matrix- https://thehivecommunity.aerohive.com/s/question/0D50c00005jmpq9CAA/</P> Fri, 08 Jun 2018 20:07:05 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/need-confirmation-of-firmware-load/m-p/86547#M11131 GeorgiaMason 2018-06-08T20:07:05Z