topic Re: HiveManager ACLs - can you specify a range of ports? in Aerohive Migrated Content

HiveManager ACLs - can you specify a range of ports?

jose_gonzalez — Tue, 14 Aug 2018 21:46:44 GMT

It's not uncommon for applications to require a range of ports to be opened up for proper operation. Is there a way to specify the range of ports, instead of one port per line? Especially with the 64 line ACL limit on APs.

Re: HiveManager ACLs - can you specify a range of ports?

samantha_lynn — Wed, 15 Aug 2018 01:02:14 GMT

We don't have that capability currently, but I would encourage you to request it via the feedback option in HiveManager NG (looks like a chat bubble on the right hand side of most pages, with the question mark icon). In the mean time, you might want to work with your main firewall instead of the IP firewall within the user profile until we can add that option in for you.

Re: HiveManager ACLs - can you specify a range of ports?

frank_robbins — Thu, 16 May 2019 20:54:59 GMT

Where is this at on AeroHives road map? This is a basic feature that is included on my $30 tp link wireless access point. Some applications have a range that covers hundreds of ports, manual entries of these ports are absurd. Relying on a firewall outside of the AP may not work in all environments such as ours that send all traffic back to a central location for firewall inspection and there isnt a firewall in that particular office that we need to allow a resource to via wireless.

Re: HiveManager ACLs - can you specify a range of ports?

samantha_lynn — Fri, 17 May 2019 00:18:57 GMT

I just checked on this for you, and unfortunately that feature is not on the road map at this time.