topic Re: How can I use the AP650 and the Target Wake Time Feature ? in Aerohive Migrated Content

How can I use the AP650 and the Target Wake Time Feature ?

norbert_schmitz — Wed, 07 Aug 2019 19:56:11 GMT

Hello, I have a AP650 with some AX clients and I want to demonstrate the TargetWakeTime feature of the 802.11ax standard. I am searching through all the options in the HiveManager but I cannot find any option to change the TargetWakeTime.

Probably I do a fundamental mistake and the TWT is set on client side ? Does anyone have successfully tested the TWT feature ?

Re: How can I use the AP650 and the Target Wake Time Feature ?

samantha_lynn — Thu, 08 Aug 2019 01:39:13 GMT

Target Wake Time (TWT) is something the ax APs will do for ax clients as part of the 802.11ax standards. Unfortunately it isn't something we can configure.

Re: How can I use the AP650 and the Target Wake Time Feature ?

norbert_schmitz — Fri, 09 Aug 2019 16:51:03 GMT

Hi,

thanks for your feedback. Could you share some more information about that or to turn it around I will try to explain what I want to achieve.

In all your webinars about wifi 6 you mentioned that wifi 6 is perfect for IoT devices due to different facts and one of them is the TWT feature.

Now Intel has offered a wifi 6 client called AX200 which we are using.

https://ark.intel.com/content/www/us/en/ark/products/189347/intel-wi-fi-6-ax200.html

Now I want to control the TWT and I dont know where. There are basically two options: Either this is a feature of the client (and I have to talk with Intel) or it is a feature of the access point (then I have to talk with Aerohive).

You just said it isn't something Aerohive can configure so I have to talk with Intel , right ?