topic Re: How to add mac addresses to our access point in Aerohive Migrated Content

How to add mac addresses to our access point

steven_deleon — Fri, 11 Jan 2019 01:01:28 GMT

How to add mac addresses to our access point

Re: How to add mac addresses to our access point

samantha_lynn — Fri, 11 Jan 2019 01:06:24 GMT

I'm sorry, I'm not sure what you're asking here. Are you asking how to add a MAC authentication policy (users authenticate with the MAC address of their device so only known devices can log on) to an AP? Or how to add MAC addresses to an existing MAC auth policy?

Re: How to add mac addresses to our access point

steven_deleon — Fri, 11 Jan 2019 01:11:05 GMT

Yes, users authenticate with the MAC address to the their own device and only their own device can login.

Re: How to add mac addresses to our access point

samantha_lynn — Fri, 11 Jan 2019 01:15:02 GMT

Thank you for clarifying. This guide will walk you through how to set this up using HiveManager (formerly NG, cloud.aerohive.com) (Scroll down to the Radius using MAC Authentication section towards the end)- https://thehivecommunity.aerohive.com/s/article/Radius-SSID-in-NG

This guide will walk you through how to set this up using HiveManager Classic (myhive.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/MAC-Authentication-Set-Up

Does that answer your question?