topic I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. in Aerohive Migrated Content https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88629#M12026 I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. Thu, 23 May 2019 09:36:41 GMT donnie_johnson 2019-05-23T09:36:41Z I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88629#M12026 I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. Thu, 23 May 2019 09:36:41 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88629#M12026 donnie_johnson 2019-05-23T09:36:41Z Re: I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88630#M12027 <P>I would recommend sticking with uplink. Setting to trunk can cause reporting issues, i.e. the ethernet port will be viewed as a switch port and will report clients that connect through the wired interface, rather than just the radio interfaces. </P> Thu, 23 May 2019 13:48:29 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88630#M12027 bruce_stahlin 2019-05-23T13:48:29Z Re: I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode. https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88631#M12028 <P>Thanks!</P> Thu, 23 May 2019 19:35:10 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/i-have-the-new-ap650-s-even-though-it-is-currently-working-with/m-p/88631#M12028 donnie_johnson 2019-05-23T19:35:10Z