topic After an upgrade an AP250 doesn't complete the boot sequence and isn't reachable on the network. I already try with a hard reset but nothing changes. in Aerohive Migrated Content https://community.extremenetworks.com/t5/aerohive-migrated-content/after-an-upgrade-an-ap250-doesn-t-complete-the-boot-sequence-and/m-p/89003#M12151 After an upgrade an AP250 doesn't complete the boot sequence and isn't reachable on the network. I already try with a hard reset but nothing changes. Mon, 08 Apr 2019 14:56:56 GMT assistenza5 2019-04-08T14:56:56Z After an upgrade an AP250 doesn't complete the boot sequence and isn't reachable on the network. I already try with a hard reset but nothing changes. https://community.extremenetworks.com/t5/aerohive-migrated-content/after-an-upgrade-an-ap250-doesn-t-complete-the-boot-sequence-and/m-p/89003#M12151 After an upgrade an AP250 doesn't complete the boot sequence and isn't reachable on the network. I already try with a hard reset but nothing changes. Mon, 08 Apr 2019 14:56:56 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/after-an-upgrade-an-ap250-doesn-t-complete-the-boot-sequence-and/m-p/89003#M12151 assistenza5 2019-04-08T14:56:56Z Re: After an upgrade an AP250 doesn't complete the boot sequence and isn't reachable on the network. I already try with a hard reset but nothing changes. https://community.extremenetworks.com/t5/aerohive-migrated-content/after-an-upgrade-an-ap250-doesn-t-complete-the-boot-sequence-and/m-p/89004#M12152 <P>You will likely need a TFTP flash for that device, which will require a support ticket. Support will need to enter a password to being the flash process for you. </P> Mon, 08 Apr 2019 17:28:42 GMT https://community.extremenetworks.com/t5/aerohive-migrated-content/after-an-upgrade-an-ap250-doesn-t-complete-the-boot-sequence-and/m-p/89004#M12152 samantha_lynn 2019-04-08T17:28:42Z