topic Re: Does HiveManager NG support Routing on the APs in Aerohive Migrated Content

Does HiveManager NG support Routing on the APs

blw — Tue, 22 Jan 2019 22:49:03 GMT

I have the same question as posted here: https://thehivecommunity.aerohive.com/s/question/0D50c00005m6O0tCAE/ap250-use-both-ethernet-ports-as-separate-physical-links-to-2-x-networks

Are there any updates on if this is available in HiveManager NG yet? (A brief look seems to suggest not). It's working like a charm on an AP330 in HiveManager Classic.

If not, then I have been looking at the running config in HiveManager Classic. Could I add "forwarding-engine l2-default-route interface eth1 vlan 2" as a supplemental CLI object in NG? Would this be supported?

Thanks in advance!

Re: Does HiveManager NG support Routing on the APs

samantha_lynn — Tue, 22 Jan 2019 23:20:20 GMT

HiveManager NG does not support APs in router mode currently. I'll check with our development team to see if this is on the road map for future updates, I'll let you know what I hear back.

Re: Does HiveManager NG support Routing on the APs

blw — Tue, 22 Jan 2019 23:44:00 GMT

Hi Sam, thank you for this. I have added the supplemental CLI object with the command which works perfectly. Do you know if this is something that would be supported for a production network or could a HiveOS update break this functionality?

Thanks again!

Re: Does HiveManager NG support Routing on the APs

samantha_lynn — Tue, 22 Jan 2019 23:48:53 GMT

A HiveOS will require a reboot and the supplemental CLI is re-applied after each reboot, so this shouldn't break the functionality. If the command works now, I doubt we would disable the functionality later on, but I can't make an promises since I'm not on the production team.