topic Re: How to configure mesh/bridge connection between two AP1130 APs in Aerohive Migrated Content

How to configure mesh/bridge connection between two AP1130 APs

rob_pritchard — Thu, 07 Nov 2019 00:58:04 GMT

We are using HiveManager Classic v8.2r2 (on-premise). I have a school that has an existing AP1130 (we'll call this AP1) on the front of the building and this AP1130 is hard-wired to the school's server closet. We need to install an IP security camera out by the student parking lot which is about 300 feet away from the front of the school, so we want to install another AP1130 (we'll call this AP2) on a utility pole by the student parking lot as well as an outdoor switch (the AP1130 and the IP security camera will both patch in to the outdoor switch for POE). Can someone verify for me the steps that I need to take to configure AP1 and AP2 correctly in order for this to work?

Re: How to configure mesh/bridge connection between two AP1130 APs

samantha_lynn — Thu, 07 Nov 2019 03:11:27 GMT

This guide covers how to set up a Mesh configuration in HiveManager Classic: https://thehivecommunity.aerohive.com/s/article/Mesh-Connection

Re: How to configure mesh/bridge connection between two AP1130 APs

rob_pritchard — Fri, 08 Nov 2019 22:08:11 GMT

Thanks so much for this.