How to set manual 5GHz channel on Hive Manager NG Cloud?

chustm — Tue, 13 Aug 2019 14:32:50 GMT

I have created a 5GHz radio profile to be able to use UNII3 channels in my country (RLAN band 3) at very low power, but I cannot select the individual channel to use on 5 GHz band. I have tried to use code 8.x and 10.x but always the same NO option to Manually select channels to try to avoid neighbours by myself.

How could I disable ACSP?

Or is this something related with my current "Connect" subscription license?

Attached there are some profile configurations.

Regards

Jesus

Re: How to set manual 5GHz channel on Hive Manager NG Cloud?

ashley_finch — Tue, 13 Aug 2019 15:01:43 GMT

Hello,

Are you trying to select a range of channels to use, or just a single channel?

If you're trying to select a single channel you'll need to do this on the AP itself, rather than through the device template (monitor > click AP > interface settings)

topic How to set manual 5GHz channel on Hive Manager NG Cloud? in Aerohive Migrated Content

How to set manual 5GHz channel on Hive Manager NG Cloud?

Re: How to set manual 5GHz channel on Hive Manager NG Cloud?